Low Loader Transport

Nationwide · England, Scotland & Wales

Low Loader Transport across the UK

Plant, machinery and heavy loads moved on the right trailer, legally.

In short

Low Loader Transport is a UK heavy haulage service that moves plant, machinery, vehicles and oversized loads on low-deck trailers. We arrange beavertail plant lorries, step-frame and semi-low loaders, and extendable and multi-axle trailers, with load securing, route planning and abnormal load notifications handled by experienced, licensed hauliers.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Low Loader Transport quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

Excavators, dumpers, rollers, cranes and industrial machines are too tall, too heavy or too wide for a normal flatbed. A low loader drops the deck height close to the road, which keeps tall loads under bridges and lets tracked machines drive on and off by ramp. Picking the wrong trailer means the load is overheight, overweight on an axle, or simply cannot be loaded at site. Picking the right one, with a driver who knows how to chain down a 20-tonne excavator, makes the job routine.

Low Loader Transport arranges vetted, licensed hauliers across the UK with the full range of low-deck equipment, from 7.5-tonne beavertail plant lorries for mini diggers to 100-tonne-plus modular trailers. We size the trailer to your load, check the route for height and weight limits, handle abnormal load notifications when they are needed and agree collection and delivery windows that suit your site. Tell us what you are moving, its weight and dimensions, and where it is going.

How it works

  1. Share load details

    Tell us what you are moving, its weight, length, width and height, the collection and delivery addresses, and preferred dates. Spec sheets or photos help us choose the right trailer.

  2. Trailer and route plan

    We match the load to a suitable trailer and check the route for low bridges, weight limits and access. If the load is abnormal, the haulier prepares the required notifications.

  3. Quote and booking

    You receive a written quote covering trailer type, loading method, escorts or permits if needed, and delivery window. Abnormal loads need enough lead time for notifications.

  4. Loading and securing

    The machine is driven, winched or craned onto the trailer, positioned to balance axle weights and secured with chains, binders and straps rated for the load.

  5. Delivery and unloading

    The haulier delivers on the agreed route and unloads by ramp, winch or crane. Check the load on arrival and sign the delivery note once you are satisfied.

Low Loader Transport prices

Low loader transport is priced on the trailer needed, the distance and the time involved, plus any permits, escorts or cranes. A mini digger on a beavertail is a quick local job. Abnormal loads need planning, notifications and sometimes escorts, so they cost considerably more.

JobGuide priceNotes
Mini digger or small plant, local£180–£3507.5-tonne beavertail lorry with ramps, typically within around 30 miles.
8–14 tonne excavator, regional£400–£800Rigid plant lorry with hydraulic ramps; price depends on distance.
20–35 tonne machine on semi-low loader£700–£1,500Tractor unit and low loader; longer distances priced on mileage.
Step frame for tall loadsfrom £550Cabins, containers and machinery; cranes at either end are extra.
Abnormal load movefrom £1,500Includes notifications; escorts, surveys and special orders add cost.
Escort vehicle£400–£700 per dayRequired for some wide or long loads depending on dimensions and route.

What affects the price →

Who we work for

Construction contractors

Groundworkers, civil engineers and builders moving excavators, dumpers, rollers and attachments between sites as projects start and finish.

Plant hire companies

Hire firms that need extra transport capacity for deliveries and collections, or specialist trailers for larger machines their own fleet cannot carry.

Machinery dealers

Dealers delivering new and used plant to customers, moving stock between branches and collecting trade-ins from sites across the UK.

Manufacturers and engineers

Businesses moving production machines, presses, tanks and fabrications between factories or out to installation sites.

Private owners and collectors

Individuals moving tractors, vintage vehicles, motorhomes, boats or a newly bought digger who need the right trailer and an experienced driver.

Rules and standards that apply

  • Abnormal indivisible loads in Great Britain move under the Road Vehicles (Authorisation of Special Types) (General) Order 2003, known as STGO, which sets vehicle categories, weight and size limits, and notice requirements.
  • Loads above set width, length or weight thresholds must be notified in advance to the police, highway authorities and bridge owners, usually through National Highways' ESDAL system.
  • Loads wider than 5 metres need a VR1 authorisation from National Highways, and the very largest loads need a special order.
  • Anyone operating goods vehicles over 3.5 tonnes gross weight for hire or reward needs a goods vehicle operator's licence, and drivers must follow drivers' hours and tachograph rules.

How to choose the right low loader transport company

  • Check the haulier holds a goods vehicle operator's licence and carries goods in transit insurance suited to the value of your load.
  • Ask which trailer they will use and confirm its deck height, payload and length suit your machine.
  • For abnormal loads, make sure they will handle the notifications, escorts and any VR1 or special order.
  • Confirm how they will secure the load, as heavy plant should be chained down at the manufacturer's tie-down points.
  • Ask who will load and unload, and whether an operator or crane is needed at either end.
  • Agree waiting time charges and delivery windows in writing before booking.

Frequently asked questions

How much does low loader transport cost?

Moving a mini digger locally on a beavertail usually costs £180 to £350, and an 8 to 14-tonne excavator £400 to £800 regionally. Heavier machines on semi-low loaders cost £700 to £1,500 or more depending on distance. Abnormal loads start from around £1,500, with escorts and surveys on top.

What is a low loader trailer?

A low loader is a trailer with a deck set much lower than a standard flatbed, which allows tall or heavy loads to stay within height limits and makes loading by ramp easier. Types include beavertails, step frames, semi-low loaders and low-bed trailers with detachable necks for very heavy machinery.

What counts as an abnormal load in the UK?

An abnormal load is one that exceeds standard limits for weight, width or length and cannot be broken down. Typical triggers include gross weights over 44 tonnes, widths over 2.9 metres and long rigid lengths. These loads move under STGO rules, and many require advance notification to police and highway authorities.

Do I need an escort for a wide load?

Escorts or attendants depend on the load's width, length and route. Wider loads, generally over around 3.5 metres, need an attendant, and larger loads may need escort vehicles or police involvement. The haulier works this out as part of route planning and includes it in the quote.

How far in advance should I book an abnormal load?

Allow at least a week for a straightforward abnormal load, as notifications must be submitted a set number of clear working days before the move. Very heavy or wide loads needing special orders, route surveys or police escorts can take several weeks, so contact a haulier as soon as dates are known.

Can a low loader carry a 20-tonne excavator?

Yes, a 20-tonne excavator is routinely carried on a semi-low loader pulled by a tractor unit. The total weight usually stays within normal limits, but height and width need checking. Buckets may be removed and carried separately to reduce height and spread weight.

What information do I need for a low loader quote?

You need the item's weight, length, width and height, the collection and delivery addresses, preferred dates and how it will be loaded. Make and model help for plant. Also mention access issues such as soft ground, narrow lanes or low gateways at either site.

Who loads the machine onto the low loader?

Many plant hauliers have drivers trained to load and unload plant, but some customers prefer their own operator to drive the machine on. Craned loads need a separate lift plan and crane. Agree who is responsible before booking, as it affects insurance and timing.

See all FAQs →

Get a free low loader transport quote

Tell us what you need and we'll come back with a clear price.

Request a quote