Low Loader Transport

Low Loader Transport

Step Frame and Semi-Low Loader Haulage

Trailers with a lowered deck for tall loads such as machinery, modular buildings and industrial equipment that will not fit standard heights.

Free Low Loader Transport quote

No obligation. We only use your details to reply about this job.

Step Frame and Semi-Low Loader Haulage — Low Loader Transport

What's involved

A step-frame trailer has a raised front deck over the fifth wheel and a lower main deck, typically around 900mm off the ground, which gives extra height for loads like containers, cabins, machine tools and tanks. Semi-low loaders often add rear ramps for wheeled and tracked plant. Loading is by crane, forklift or ramp, depending on the item. Tall loads are measured carefully, because once the deck height is added, a 4-metre load can easily exceed 4.9 metres overall, which brings low bridges and overhead structures into play. Loads are secured with chains, ratchet straps and edge protectors, and timber dunnage is used to spread weight and stop movement. Give us the exact dimensions, weight and lifting points, and tell us whether a crane or forklift will be available at both ends.

How we handle it

  1. Share load details

    Tell us what you are moving, its weight, length, width and height, the collection and delivery addresses, and preferred dates. Spec sheets or photos help us choose the right trailer.

  2. Trailer and route plan

    We match the load to a suitable trailer and check the route for low bridges, weight limits and access. If the load is abnormal, the haulier prepares the required notifications.

  3. Quote and booking

    You receive a written quote covering trailer type, loading method, escorts or permits if needed, and delivery window. Abnormal loads need enough lead time for notifications.

  4. Loading and securing

    The machine is driven, winched or craned onto the trailer, positioned to balance axle weights and secured with chains, binders and straps rated for the load.

  5. Delivery and unloading

    The haulier delivers on the agreed route and unloads by ramp, winch or crane. Check the load on arrival and sign the delivery note once you are satisfied.

Price guide

Low loader transport is priced on the trailer needed, the distance and the time involved, plus any permits, escorts or cranes. A mini digger on a beavertail is a quick local job. Abnormal loads need planning, notifications and sometimes escorts, so they cost considerably more.

  • Escort vehicle: £400–£700 per day. Required for some wide or long loads depending on dimensions and route.
  • Mini digger or small plant, local: £180–£350. 7.5-tonne beavertail lorry with ramps, typically within around 30 miles.
  • 8–14 tonne excavator, regional: £400–£800. Rigid plant lorry with hydraulic ramps; price depends on distance.

Questions about step frame and semi-low loader haulage

How much does low loader transport cost?

Moving a mini digger locally on a beavertail usually costs £180 to £350, and an 8 to 14-tonne excavator £400 to £800 regionally. Heavier machines on semi-low loaders cost £700 to £1,500 or more depending on distance. Abnormal loads start from around £1,500, with escorts and surveys on top.

What is a low loader trailer?

A low loader is a trailer with a deck set much lower than a standard flatbed, which allows tall or heavy loads to stay within height limits and makes loading by ramp easier. Types include beavertails, step frames, semi-low loaders and low-bed trailers with detachable necks for very heavy machinery.

Can a low loader carry a 20-tonne excavator?

Yes, a 20-tonne excavator is routinely carried on a semi-low loader pulled by a tractor unit. The total weight usually stays within normal limits, but height and width need checking. Buckets may be removed and carried separately to reduce height and spread weight.

Get a free low loader transport quote

Tell us what you need and we'll come back with a clear price.

Request a quote