Guide · Contractors · 4 min read · Updated 17 November 2026
How Much Does Low Loader Transport Cost in the UK?
Short answer
Moving a mini digger or small plant locally on a 7.5-tonne beavertail typically costs £180–£350. An 8–14 tonne excavator moved regionally costs £400–£800, and a 20–35 tonne machine on a semi-low loader £700–£1,500. Step frame work starts from £550, abnormal load moves from £1,500, and escort vehicles cost £400–£700 per day. Weight, dimensions, distance and notifications set the final price.
Low loader prices at a glance
Low loader transport is priced on the size of vehicle the load needs, the distance travelled and any extra work the load's dimensions create. A mini digger fits on a small beavertail plant lorry with ramps and can be moved by one driver in a couple of hours. A 30-tonne excavator needs a tractor unit and semi-low loader, a driver qualified for articulated vehicles and careful load securing. Once a load goes beyond the normal size and weight limits for UK roads, it becomes an abnormal load, which brings notifications, route planning and sometimes escorts.
The figures below are typical 2026 guide prices. They assume a straightforward collection and delivery with good access at both ends.
| Job | Guide price | Typical vehicle |
|---|---|---|
| Mini digger or small plant, local | £180–£350 | 7.5-tonne beavertail with ramps, around 30 miles |
| 8–14 tonne excavator, regional | £400–£800 | Rigid plant lorry with hydraulic ramps |
| 20–35 tonne machine | £700–£1,500 | Tractor unit and semi-low loader |
| Step frame for tall loads | from £550 | Cabins, containers and machinery |
| Abnormal load move | from £1,500 | Includes notifications |
| Escort vehicle | £400–£700 per day | For some wide or long loads |
What drives the price
The weight and dimensions of the load decide which trailer is needed, and the trailer decides much of the cost. A load that fits within normal Construction and Use limits, which allow a maximum width of 2.55 metres and a gross weight of up to 44 tonnes for most articulated vehicles, can travel without special arrangements. Anything wider, longer or heavier moves under the Special Types rules and needs more planning.
Distance matters next. Local plant moves are often priced as a fixed rate for the area, while longer journeys are priced on mileage and driver time. Drivers' hours rules limit how far one driver can go in a day, so very long moves may need an overnight stop.
- Weight, width, length and height of the load
- Type of trailer required
- Distance and the driver time involved
- Access at collection and delivery sites
- Abnormal load notifications and any escorts
- Waiting time on site and loading assistance
Small plant and mid-size machines
The most common jobs are moving mini diggers, dumpers, rollers and telehandlers between sites, yards and hire depots. A 7.5-tonne beavertail plant lorry with ramps handles small plant economically, typically for £180–£350 within around 30 miles. These lorries can often reach tighter sites than larger trailers and can be loaded quickly.
Machines in the 8–14 tonne range usually need a larger rigid plant lorry with hydraulic ramps, costing £400–£800 for a regional move. The price depends mainly on distance, but awkward access or a machine with attachments that need transporting separately can add time.
Many plant hire firms run their own beavertail lorries, but at busy times or for one-off moves, an independent haulier can be quicker to book. Give the haulier the exact model of machine, because operating weights vary widely even within the same size class, and a few hundred kilograms can decide which lorry is needed.
Heavy plant and tall loads
Excavators and other machines from about 20 to 35 tonnes travel on a semi-low loader pulled by a tractor unit, typically costing £700–£1,500. Longer distances are priced on mileage. These moves need careful planning of the loading area, because the trailer needs space to manoeuvre and a firm, level surface for loading.
Tall loads such as portable cabins, containers and some machinery often go on a step frame trailer, which has a lower deck behind the gooseneck to keep the overall height down. Step frame work starts from £550, and cranes at either end to lift cabins on and off are charged separately.
Abnormal loads and escorts
Loads that exceed the normal size or weight limits move under the Road Vehicles (Authorisation of Special Types) (General) Order 2003, known as STGO. Abnormal load moves start from £1,500 including notifications to the police, highway authorities and bridge owners, which are usually made through National Highways' ESDAL system. Route surveys, special orders and escorts add to the cost.
Escort vehicles cost £400–£700 per day and are required for some wide or long loads, depending on the dimensions and the route. Very wide loads may also need movement at specific times or police involvement.
Extras to budget for
Some costs sit outside the basic haulage price. Waiting time is the most common: if the machine is not ready, the site is locked or the operator is late, the driver's time is usually charged by the hour after an agreed period. Cranes to lift cabins, containers or machines that cannot drive on are booked and charged separately. Parking suspensions or road permits may be needed in towns and cities. For abnormal loads, route surveys, escorts and any police requirements add to the base price. Ask the haulier to list these possible extras on the quote, so you can plan for them rather than discovering them on the invoice.
How to get an accurate quote
Give the make and model of the machine, its operating weight and its transport dimensions, including length, width and height with any attachments. Provide the full collection and delivery addresses, describe access at both sites, and say whether the machine can be driven on and off or needs lifting. Mention any deadlines and whether out-of-hours delivery is acceptable. With this information, a haulier can choose the right vehicle, confirm whether notifications are needed and give you a firm price.
Booking several moves together, such as delivering plant to a new site and collecting from a finished one on the same day, can reduce empty running and lower the overall cost. Ask whether a return load is possible when you book.
Questions people also ask
How much does it cost to move a mini digger?
A mini digger moved locally on a 7.5-tonne beavertail plant lorry typically costs £180–£350, usually within around 30 miles. Longer distances, difficult access or extra attachments can increase the price. Give the exact model and weight when asking for a quote.
How much does it cost to move a 20-tonne excavator?
A 20–35 tonne machine on a semi-low loader typically costs £700–£1,500, with longer distances priced on mileage. If the machine is wider than normal limits with tracks or attachments fitted, abnormal load rules and notifications may apply, increasing the cost.
Do I pay extra for abnormal load notifications?
Abnormal load moves start from £1,500 and include the notifications to police, highway authorities and bridge owners. Route surveys, escort vehicles at £400–£700 per day and special orders for the very largest loads are additional, depending on the size of the load and the route.
Written and checked by the Low Loader Transport team. Read our editorial policy.
More guides
Abnormal Load Rules in the UK: STGO, ESDAL and VR1 Explained
An abnormal load is an indivisible load that exceeds normal vehicle size or weight limits. In Great Britain these move under the STGO, which sets…
Types of Low Loader Trailer: Which One Does Your Load Need?
Beavertail plant lorries carry mini diggers and small plant. Rigid plant lorries with hydraulic ramps handle mid-size machines. Step frame trailers…
How to Prepare Plant Machinery for Low Loader Transport
Give the haulier accurate weights and transport dimensions, including attachments. Make sure the collection and delivery sites have firm, level…
How to Choose a Low Loader or Heavy Haulage Company
Choose a haulier with a valid goods vehicle operator's licence, the right trailers for your load, goods-in-transit and public liability insurance…
Get a free low loader transport quote
Tell us what you need and we'll come back with a clear price.
Request a quote