Perth and Kinross · Scotland
Low Loader Transport in Perth
Our Perth low loader service covers plant haulage, abnormal loads and vehicle transport, including runs to Glenrothes and Dundee.
Where we work around Perth
Perth falls within Perth and Kinross, Scotland. Jobs here are mostly in the PH1 and PH2 postcode areas. Nearby places we also cover include Scone, Bridge of Earn, Almondbank and Luncarty.
Low Loader Transport in Perth: local know-how
In Scotland, building warrants are issued by the local council, and much of the older stock is stone-built with harling or render. New housing estates in Perth usually have wider roads, which can make plant deliveries easier once construction traffic has cleared. Abnormal loads in Scotland are notified through the same ESDAL system, with Transport Scotland and local roads authorities involved for routes near Perth.
Residential roads in Perth may not suit large tractor units, so smaller rigid plant lorries are often the better choice. Driveway and extension jobs in suburban Perth usually need mini diggers delivered on a 7.5-tonne beavertail.
What we can do in Perth
Extendable and Multi-Axle Trailers
Long and very heavy loads such as beams, piles, wind turbine parts and transformers on trailers that extend or add axles.
Step Frame and Semi-Low Loader Haulage
Trailers with a lowered deck for tall loads such as machinery, modular buildings and industrial equipment that will not fit standard heights.
Abnormal Load Transport
Moving indivisible loads that exceed standard weight, width or length limits, with notifications, escorts and route surveys.
Plant Machinery Haulage
Moving excavators, dumpers, rollers, telehandlers and other construction plant between depots, sites and dealers.
Site and Depot Moves
Relocating fleets of plant, cabins and equipment between sites, yards and depots, often across several loads and days.
Vehicle and Machinery Recovery Transport
Moving non-running vehicles, tractors, vintage machinery, boats and motorhomes on low-deck trailers with winches.
Typical costs in Perth
- Abnormal load move: from £1,500. Includes notifications; escorts, surveys and special orders add cost.
- Step frame for tall loads: from £550. Cabins, containers and machinery; cranes at either end are extra.
- 20–35 tonne machine on semi-low loader: £700–£1,500. Tractor unit and low loader; longer distances priced on mileage.
Prices are a guide. Your quote for Perth is a fixed price based on the details you give us. Full price guide.
Low Loader Transport questions from Perth
Can you move an excavator from Perth to Glenrothes?
Yes, moving an excavator between Perth and Glenrothes is a common job. We match the machine to a beavertail, rigid plant lorry or semi-low loader depending on its weight, and check the route for restrictions.
What trailer do I need for my machine in Perth?
The trailer depends on your machine's weight and height. In Perth, small plant usually goes on a beavertail, mid-size excavators on rigid plant lorries, and heavier machines on semi-low loaders. Send the make and model and we will advise.
Do you move farm machinery near Perth?
Yes, we move tractors, combines and agricultural machinery around Perth and across Perth and Kinross. Wide farm machinery often needs route planning and sometimes notifications, so allow enough time before harvest.
Do you handle abnormal load notifications for Perth?
Yes, our hauliers handle notifications for abnormal loads moving through Perth, including notices to police, highway and bridge authorities through ESDAL. Allow at least a week for straightforward moves and longer for very large loads.
How are machines secured on a low loader?
Machines are secured with chains and binders or heavy-duty straps attached to the trailer's lashing points and the machine's tie-down points. Tracks and wheels are blocked where needed, and booms and buckets are lowered and secured. The aim is to prevent movement forwards, backwards and sideways during braking and cornering.
What is the height limit for loads on UK roads?
There is no single legal height limit for vehicles in the UK, but bridge clearances commonly start at around 16 feet 6 inches, or about 5 metres, on main routes. Many bridges are lower. Hauliers must plan routes around low bridges, and loads over set heights need careful route checks.
Helpful guides
How to Choose a Low Loader or Heavy Haulage Company
Choose a haulier with a valid goods vehicle operator's licence, the right trailers for your load, goods-in-transit and public liability…
Read the guide →How Much Does Low Loader Transport Cost in the UK?
Moving a mini digger or small plant locally on a 7.5-tonne beavertail typically costs £180–£350. An 8–14 tonne excavator moved regionally…
Read the guide →Get a free low loader transport quote in Perth
Tell us what you need and we'll come back with a clear price.
Request a quote